V1.00.13
Fix the bug that the audio right and left channels are inverted at PC XINPUT mode when 2.4G connection
Quick Start
※ F700 Elite Arcade Stick and 2.4g receiver will use a same firmware, but update them separately.
Firmware Update for the Arcade Stick
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Open the updater.
Press and hold “Start" and "Select” button on the Arcade Stick F700 Elite（do not release the both buttons）and then connect F700 Elite directly to a USB interface on your PC.
As soon as the updater window indicates under “Device” that the Arcade Stick F700 Elite has been recognized, you may release “Start" and "Select" button.
Select “Update”
Do not disconnect the device until you are informed that the updated was completed successfully.
Firmware Update for 2.4g Receiver
Double click on the firmware.
Plug the 2.4g receiver into a USB interface on your PC.
As soon as the 2.4g receiver has been recognized, you may select “Update”.
Do no disconnect the device until you are informed that the update was completed successfully.
More Instructions
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system
Press and hold “Start" and "Select" button on the Arcade Stick F700 Elite. Plug the USB cable of F700 Elite in o your PC.
As soon as the updater window indicates under “Device” that the Arcade stcik F700 Elite has been recognized,you may release “Start" and "select" button. select “Update”.
Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.
Press "OK" to complete the update.
