V1.22
- MAYFLASH F300 is compatible with PS5 by two ways.
1. By MAYFLASH MAGIC-S Pro
Quick Start:
Plug the MAGIC-S Pro adapter in o the USB port of Arcade stick F300.
Turn on your PS5 Console.Then it's ready for you to play the PS5 games.
[* MAGIC-S Pro is discontinued. Please purchase MAGICS Ultimate instead.
You can purchase Magic-S Ultimate on Amazon]
2. By third Party PS4 Controller
Quick Start:
Plug the third party PS4 Controller in o the USB port of Arcade stick F300.
Turn on your PS5 Console.Then it's ready for you to play the PS5 games.
Compatible third party PS4 Controllers list.
ASTRO PS4 Wireless Gamepad C40(Model No.GR0004;USB mode)
VANTAGE PS4 SCUFGAMING(Model No.SG305-02;USB mode)
Razer PS4 RAIJU ULTIMATE(Model No.RZ06-0260;USB mode)
Razer PS4 RAIJU TOURNAMENT EDITION(Model No.RZ06-02610100-R3G1;USB mode)
(We'll keep updated to make more third party PS4 controllers compatible)
- MAYFLASH F300 is compatible with Xbox Series X/S
Quick Start:
Plug the Microsoft Xbox Series X/S Controller in o the USB port of Arcade stick F300.
Turn on your PS5 Console.Then it's ready for you to play the PS5 games.
Some third party controllers are also compatible. You can connect POWER A Xbox One Controller (Model No.1506684-02）
POWER A Xbox One Controller FUSION（Model No.1510522-01）or HORI Xbox One Controller（Model No.XBO-011 U/E）with the arcade stick F300 to work on Xbox Series X/S
* The wireless controller that comes with your console will become a wired controller by simply connecting a standard USB cable.
This manual describes how to update the firmware of MAYFLASH F300.
NOTE : The update must be done on a PC (Window OS); it cannot be done on a console individually .
NOTE : Make sure your PC is connected to the internet.
NOTE : Disable antivirus before executing the program.
Quick Start
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Double click on the firmware and leave the firmware window open on your screen.
Press and hold “HOME” button on the Arcade Stick F300.
Connect the Arcade Stick F300 directly to a USB interface on your PC, still holding “HOME” button at entire time.
As soon as the updater window indicates under “Device” that the Arcade stcik F300 has been recognized, you may release “HOME” button.
select “update”
Do not disconnect the device until you are informed that the updated was completed successfully.
More Instructions
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system
Press and hold “HOME” button on the Arcade Stick F300. Plug the USB cable of F300 in o your PC.
As soon as the updater window indicates under “Device” that the Arcade stcik F300 has been recognized, you may release “HOME” button. select “update”.
Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.
Press "OK" to complete the update.
