Compatible with the mouse Bloody A60
Quick Start
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Double click on the updater and leave the updater window open on your screen.
Press and hold the Home button in the middle of the Max Shooter One.
Connect the Max Shooter One directly to a USB interface on your PC, still holding the Home button the entire time.
As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the Home button.
select “UPGRADE”.
Donot disconnect the device until you are informed that the updated was completed successfully.
More Instructions
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Press and hold the HOME button on the adapter and connect the USB from your adapter in o any available port on your PC.
You may release the Home button as soon as the driver window identifies the adapter under “Device”, After clicking the update button, wait for the program to upgrade automatically, and the progress bar will run twice for completion.
Do not disconnect the device until you are informed that the updated was completed successfully.
Press "OK" to complete the update.
