V1.07.12
Buttons Remapping instructions as below .
Add three Button Remapping Options as below.
1. To switch the Button B to Y on the N64 Controller by pressing and holding the Button Start and D-Pad UP for 3 seconds.
2. To switch the Button B to X on the N64 Controller by pressing and holding the Button Start and D-Pad LEFT for 3 seconds.
3. To switch the Button A to A,and B to B on the N64 Controller by pressing and holding the Button Start and D-Pad RIGHT for 3 seconds.
To switch back to the default settings (A=B,B=A) by pressing and holding the Button Start and D-Pad DOWN for 3 seconds.
Quick Start
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Double click on the updater and leave the updater window open on your screen
Press and hold the HOME button on the adapter, and connect the USB from your adapter in o any spare port on your PC.
As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.
select “update”.
Do not disconnect the device until you are informed that the updated was completed successfully.
More Instructions
Download the firmware from https://www.mayflash.com/Support/and install it on your Windows system
Press and hold the HOME button on the adapter, and connect the USB from your adapter in o any available port on your PC.
You may release the button as soon as the driver window indicates under “Device” that the adapter has been recognized.select “update”;Twait for the program to upgrade automatically. The progress bar will run twice for completion.
Do not disconnect the device until you have been informed that the update was completed successfully.
Press “OK”
