V1.13
Compatible with macOS (Xinput Mode)
Note：Press and hold "select"+"A/X" for 3seconds to switch to MacOS mode
Press and hold "select"+"B/O" for 3seconds to switch to Xinput mode
This manual describes how to update the firmware of MAYFLASH F500 Elite.
NOTE : The update must be done on a PC (Window OS); it cannot be done on a console individually .
NOTE : Make sure your PC is connected to the internet.
NOTE : Disable antivirus before executing the program.
Quick Start
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Double click on the firmware and leave the firmware window open on your screen.
Press and hold “Start" and "select” button on the Arcade Stick F500 ELITE.
Connect the Arcade Stick F500 ELITE directly to a USB interface on your PC,still holding “Start" and "select" button at entire time.
As soon as the updater window indicates under “Device” that the Arcade stcik F500 ELITE has been recognized, you may release “Start" and "select" button.
select “update”
Do not disconnect the device until you are informed that the updated was completed successfully.
More Instructions
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system
Press and hold “Start" and "select" button on the Arcade Stick F500 ELITE. Plug the USB cable of F500 Elite in o your PC.
As soon as the updater window indicates under “Device” that the Arcade stcik F500 ELITE has been recognized,you may release “Start" and "select" button. select “update”.
Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.
Press "OK" to complete the update.
