Magic-NS Wireless Controller Adapter V1.29: 1. Compatible with SNK NEOGEO Arcade Stick PRO 2. Fix the bug that the Xbox One Controller updated to V4.8.1923.0 can't work

V1.29

1. Compatible with SNK NEOGEO Arcade Stick PRO

- NEOGEO Console Mode Quick Start

1)Turn on your NEOGEO Arcade Stick Pro and connect it to your TV.

2)Switch to the Console Mode via using the switch on the side of the Arcade Stick

3)Connect your Magic NS to your NEOGEO Arcade Stick Pro via a Type-C cable.

4)Connect your Controller with Magic NS via Bluetooth or a USB cable.

5)The Bluetooth has been paired if the LED indictor lights up and your controller is ready to use now.

- NEOGEO Joystick Mode Quick Start

1)Switch the NEOGEO Aracde Stick Pro to the Joystick Mode and 1 NEOGEO mini via using the two switches on side of the Arcade Stick.

2)Connect your NEOGEO Arcade Stick Pro to your Magic NS.

3)Connect your Magic NS to your Nintendo Switch or PS4.

4)You are ready to play now.

2. Fix the bug that the Xbox One Controller updated to V4.8.1923.0 can't work.

Quick Start

1. Download the software from https://www.mayflash.com/Support and install it on your Windows system.

2. Double click on the updater and leave the updater window open on your screen.

3. Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC.

4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.

5. select “update”.

6. Do not disconnect the device until you are informed that the updated was completed successfully.

Switch Pro mode (the LED indicator is purple)

To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system.

once you switch the adapter to the Switch Pro mode (the LED indicator is purple) .

Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON.

More Instructions

1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

   

2. Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC, and wait for 3-5 seconds. After completing the above steps, the program automatically identifies the adapter (LED indicator turns off).

   

3. Click "update" and wait for a few seconds. The update is completed when the progress bar reaches 100%.

   Note: Do not disconnect the device until you are informed that the updated was completed successfully

   

4. Press "OK" to complete the update.