Wireless Arcade Stick F700X V1.03.13: 1ms input lag and more

V1.03.13

1. Real lowest 1ms input lag for all platforms at USB wired connection 

2. Fix the bug that both 2.4G dongle can not work simultaneously on Xbox

Quick Start

※ F700X Arcade Stick and 2.4g receiver will use a same firmware, but update them separately.

Firmware Update for the Arcade Stick

1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

2. Open the updater.

3. Press and hold “Start" and "Select” button on the Arcade Stick F700X（do not release the both buttons）and then connect F700X directly to a USB interface on your PC.

4. As soon as the updater window indicates under “Device” that the Arcade Stick F700X has been recognized, you may release “Start" and "Select" button.

5. Select “Update”

6. Do not disconnect the device until you are informed that the updated was completed successfully.

Firmware Update for 2.4g Receiver

1. Double click on the firmware.

2. Plug the 2.4g receiver into a USB interface on your PC.

3. As soon as the 2.4g receiver has been recognized, you may select “Update”.

4. Do no disconnect the device until you are informed that the update was completed successfully.

More Instructions

1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system

   
   

   

2. Press and hold “Start" and "Select" button on the Arcade Stick F700X. Plug the USB cable of F700X in o your PC.

   
   

   

3. As soon as the updater window indicates under “Device” that the Arcade stcik F700X has been recognized,you may release “Start" and "select" button. select “Update”.

   Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.

   
   

   

4. Press "OK" to complete the update.