Magic-S Wireless Controller Adapter(For Magic-S Rev 1.1) V1.09: This is a beta version to support PS5 Dualsense Controller and Xbox Series X Controller; Xbox Series X controller works well in wired

2020-11-11 14:00:58
Product :
Wireless Controller Adapter for Switch & PS3 & PC & NEOGEO mini & PS Classic
Item No. :
MAGIC-S(For Magic-S Rev 1.1)
Version No :
V1.09
File Type :
EXE
Download

V1.09 (This is a beta version to support PS5 Dualsense Controller and Xbox Series X Controller)
1. Compatible with PS5 Dualsense Controller.
- This beta version does not support the rumble.
- The sixaxis gyroscope/motion control is supported when you use the PS5 Dualsense Controller on the Switch by an USB cable (wired connection, Purple LED mode).
- The bluetooth connection does not support six-axis gyroscope/motion control currently.
2. Compatible with Xbox Series X Controller. The rumble is supported.
3. We’ll offer an updated version soo



Note: This firmware update only supports MAYFLASH Magic-S, NOT Magic-S Rev 1.1.

Please check the product version on the back side (sticker) of the Magic-S.

MAYFLASH Limited

Quick Start

  1. Download the software from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the updater and leave the updater window open on your screen.

  3. Press and hold the button on the side of the adapter, and connect the USB from your adapter into any spare port on your PC.

  4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.

  5. Select “Update”.

  6. Do not disconnect the device until you are informed that the updated was completed successfully.



Switch Pro mode (the LED indicator is purple)

To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system.

once you switch the adapter to the Switch Pro mode (the LED indicator is purple) .

Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON.

MAYFLASH Limited


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

    MAYFLASH Limited

  2. Press and hold the button on the side of the adapter, and connect the USB from your adapter into any spare port on your PC, and wait for 3-5 seconds. After completing the above steps, the program automatically identifies the adapter (LED indicator turns off).

    MAYFLASH Limited

  3. Click "update" and wait for a few seconds. The update is completed when the progress bar reaches 100%.

    Note: Do not disconnect the device until you are informed that the updated was completed successfully


    MAYFLASH Limited

  4. Press "OK" to complete the update.

    MAYFLASH Limited