V1.03
Supports Nintendo Switch
Notes:
1. Please push the switch located on the left top corner of the F100 Arcade Stick to the "Xinput" mode
The F100 can be identified by the Nintendo Switch system and PC system automatically.
2. If the F100 can not be identified by the Switch and PC system automatically, please switch to the Xinput mode by pressing and holding "START" and "Y/△" for 3 seconds,
or switch to the Nintendo Switch mode by pressing and holding "START" and "X/□" for 3 seconds.
This manual describes how to update the firmware of MAYFLASH F100.
NOTE : The update must be done on a PC (Window OS); it cannot be done on a console individually .
NOTE : Make sure your PC is connected to the internet.
NOTE : Disable antivirus before executing the program.
Quick Start
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Double click on the firmware and leave the firmware window open on your screen.
Press and hold “Start" and "select” button on the Arcade Stick F101.
Connect the Arcade Stick F101 directly to a USB interface on your PC, still holding “Start" and "select" button at entire time.
As soon as the updater window indicates under “Device” that the Arcade stcik F101 has been recognized, you may release “Start" and "select" button.
select “update”
Do not disconnect the device until you are informed that the updated was completed successfully.
More Instructions
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system
Press and hold “Start" and "select" button on the Arcade Stick F101. Plug the USB cable of F101 in o your PC.
As soon as the updater window indicates under “Device” that the Arcade stcik F101 has been recognized, you may release “Start" and "select" button. select “update”.
Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.
Press "OK" to complete the update.
