System Compatibility
Switch 2/Switch . Windows . Raspberry Pi. macOS . PlayStation 3. NEOGEO mini . SNK NEOGEO Arcade Stick PRO . SEGA Genesis Mini . SEGA Mega Drive Mini . Sega Astro City Mini
Controller Compatibility
Bluetooth Controllers: DualSense, DualShock 4, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro.
(MAGIC-NS Lite is not compatible with DualShock 3. No USB Type C Cable included in the packaging.)
Special Features
Supports 6-axis motion on Switch and Vibration on Switch, Xinput and PS3.
The vibration intensity and dead zone can be adjusted. 7 levels of the vibration intensity and deadzone.
Supports Turbo and Auto fire.
Supports Bluetooth headset on Switch (LED Red).
The buttons A, B, X, Y can be exchanged.
Lag – free.
update to latest firmware at mayflash.com.
Dimensions and Weight
62.5x20x8.7mm
8g
LED Indicators
Adjust the vibration and dead zone
Supports Turbo and Auto fire
TURBO SETUP:
Going to the SETUP MODE by Pressing and holding "View"+"↑" (Dpad) for 3secs(LED be blinking and controller vibrates shortly).
Press once "View"+the button on the controller(only 8 buttons can be setup . E.G Xbox One controller ，there are A,B,X,Y,LB,LT,RB,RT) . Such as press once "View" +"B" ，the "B" is Turbo button . Second press "View" +"B" ,"B" is Auto Fire button . Third press "View" +"B" , Turbo and auto fire of "B" button will be cancelled .
Turbo speed adjust ，Default speed is 15times/sec ，Press once "View"+"←" ,Turbo speed adjusted to 5times/sec .，Press once "View"+ "→" ,Turbo speed adjusted to 25times/sec .
Exit TURBO MODE by pressing and holding "View" for + "↓" 3secs .
Note：
Turbo CAN be remembered if the controller disconnect with Mayflash adapter or Mayflash adapter disconnect with game console/PC or Reboot game console /awake from sleep mode etc after exit TURBO MODE . Otherwise ，it won't be remembered .
Select button doesn't work while TURBO is active . "View" + "HOME/Xbox/PS" combination buttons ="View"
The input lag of A,B,X,Y,LT ,RT ,LB,RB will rising than before if setup it as Turbo！
Supports Bluetooth Headset
Note: Bluetooth headset only used for Switch mode (LED Indicator is Red).
Only works with A2DP (High quality audio signals) connection， HFP(Audio and chatting) connection is not supported due to Nintendo Switch does not support microphone over Bluetooth with its internal Bluetooth receiver.
Small Size, High Quality!
| System Compatibility | Special Features |
|
|
| Controller Compatibility | |
| Bluetooth Controllers: | Wired USB Controllers: |
| N/A |
| Connectivity | Dimensions and Weight |
|
|
| Includes | |
| |
M:V1.07 S:V1.30
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=205
Compatible with Google Stadia controller
--Please re-plug the Stadia controller to Magic adapter once it disconnected of not use for several minutes in wired connection
Compatible with Razer Raiju Ultimate controller
--Switch to PC/BT mode for the controller, 6-axis motion control and rumble are not supported.
Supports R1&L1 remapping
--R1=L1, L1=R1 by pressing and holding Start+R1 for 3 seconds.
--Reset to default L1=L1, R1=R1 by pressing and holding Start+L1 for 3 seconds
Change the vibration intensity level from 7 levels to 10
（0% 25% 37.5% 50% 62.5% 75% 87.5% 100% 125% 150%, The default vibration intensity is 100%.）
Adjust the vibration intensity
Quick Start:
Pressing and holding the two buttons R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
(Note: You need to keep holding these two buttons until you finish the whole process)
To adjust the vibration intensity, press the Directional Pad "Up" or "Down".
To quit the vibration adjusting, release any button of R1/RB or R3 once you have got your preferred vibration intensity.
(Note: No vibration on the Nintendo Switch System mode/LED in red. The vibration is compatible with PS3 Game Console on the PS3 or PC Dinput System mode/LED in blue)
M:V1.06 S:V1.27
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=199
Compatible with DualSense Edge controller
M:V1.06 S:V1.26
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=191
Compatible with more original or third party controllers as below.
| TYPE | WIRELESS | |
| GuliKit KingKong 2 Pro Controller | NS09 | YES (6-axis Motion Control is not supported ) |
| ipega SW001 Wireless Controller | PG-SW001 | YES |
| Flydigi Direwolf Wireless Gaming Controller | Direwolf | BT & 2.4G |
M:V1.05 S:V1.25
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=186
Compatible with Steam Deck (LED Indicator is Green)
M:V1.05 S:V1.24
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=175
TURBO SETUP:
Going to the SETUP MODE by Pressing and holding "View"+"↑" (Dpad) for 3secs(LED be blinking and controller vibrates shortly).
Press once "View"+the button on the controller(only 8 buttons can be setup . E.G Xbox One controller ，there are A,B,X,Y,LB,LT,RB,RT) . Such as press once "View" +"B" ，the "B" is Turbo button . Second press "View" +"B" ,"B" is Auto Fire button . Third press "View" +"B" , Turbo and auto fire of "B" button will be cancelled .
Turbo speed adjust ，Default speed is 15times/sec ，Press once "View"+"←" ,Turbo speed adjusted to 5times/sec .，Press once "View"+ "→" ,Turbo speed adjusted to 25times/sec .
Exit TURBO MODE by pressing and holding "View" for + "↓" 3secs .
Note：
Turbo CAN be remembered if the controller disconnect with Mayflash adapter or Mayflash adapter disconnect with game console/PC or Reboot game console /awake from slep mode etc after exit TURBO MODE . Otherwise ，it won't be remembered .
selct button doesn't work while TURBO is active . "View" + "HOME/Xbox/PS" combination buttons ="View"
The input lag of A,B,X,Y,LT ,RT ,LB,RB will rising than before if setup it as Turbo！
Document: https://www.mayflash.com/FAQ/shownews.php?lang=en&id=30
You may also setup the Turbo following up YouTube video instructions . 
https://youtu.be/0bTT3DCx_CY
M:V1.03 S:V1.23
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=170
Compatible with Betop Zeus T6 Elite Gamepad (Model No. BTP-T6).
Fix some bugs.