MAYFLASH F700 series V1.04 for Mac Version Updater

Update your F700 series : F700/F700Elite/F700X/F700 Flat Elite to the latest firmware version on MacOS 

This is the Mac Version updater . If you are using Windows ，please download Windows version updates from Mayflash website  

Noted:

1. Please turn on App Store & Known Developers for MacOS

System Settings –Privacy&Security -- App Store & Known Developers

2. CAN NOT downgrade the firmware version to an older version on MacOS . Downgrading is only supported on Windows .

3. Firmware updates on iPhone and iPad are not supported

F700X: V1.03.13

1. Real lowest 1ms input lag for all platforms at USB wired connection 

2. Fix the bug that both 2.4G dongle can not work simultaneously on Xbox

F700 Elite: V1.00.13

Fix the bug that the audio right and left channels are inverted at PC XINPUT mode when 2.4G connection

F700: V1.15.10

Supports L3&R3 

1）L3: Press and hold "Turbo" firstly and then press "Select"

2）R3: Press and hold "Turbo" firstly and then press "Start"

Quick Start

※ F700 Arcade Stick and 2.4g receiver will use a same firmware, but update them separately.

Firmware Update for the Arcade Stick

1. Download the firmware from https://www.mayflash.com/Support and install it on your MacOS system.

2. Open the updater.

3. Press and hold “Start" and "Select” button on the Arcade Stick F700（do not release the both buttons）and then connect F700 directly to a USB interface on your PC.

4. As soon as the updater window indicates under “Device” that the Arcade Stick F700 has been recognized, you may release “Start" and "Select" button.

5. Select “Update”

6. Do not disconnect the device until you are informed that the updated was completed successfully.

Firmware Update for 2.4g Receiver

1. Double click on the firmware.

2. Plug the 2.4g receiver into a USB interface on your PC.

3. As soon as the 2.4g receiver has been recognized, you may select “Update”.

4. Do no disconnect the device until you are informed that the update was completed successfully.

More Instructions

1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system

   
   

   

2. Press and hold “Start" and "Select" button on the Arcade Stick F700. Plug the USB cable of F700 in o your PC.

   
   

   

3. As soon as the updater window indicates under “Device” that the Arcade stcik F700 has been recognized,you may release “Start" and "select" button. select “Update”.

   Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.

   
   

   

4. Press "OK" to complete the update.